5-wire trunk release
Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=23313
Printed Date: October 31, 2024 at 6:04 PM
Topic: 5-wire trunk release
Posted By: Fuse Blower
Subject: 5-wire trunk release
Date Posted: December 24, 2003 at 7:41 PM
Never ran into this problem before installing trunk release on a 2001 dodge stratus they say it's a 5 wire hook up if you can walk me threw this i would appreciate
-------------
}:)
Replies:
Posted By: auex
Date Posted: December 24, 2003 at 8:21 PM
Cut the trunk release wire. Take the output from your alarm, which is probably negative, and put it to pin 85 of a relay, pin 86 will be +12V, pin 30 will be the half of the trunk release wire that goes to the soleniod, pin 87A will be the other half of the wire(going to the switch/computer), and pin 87 will be +12V. Someone else could verify this, I am pretty sure this is what needs to be done.
-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
Posted By: Fuse Blower
Date Posted: December 24, 2003 at 8:25 PM
how do i know i have the correct wire 2002 dodge stratus ------------- 
Posted By: auex
Date Posted: December 24, 2003 at 8:29 PM
It will pulse +12V when you hit the car's trunk release button. The color should be BLACK/ white and is located at the bcm.
-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
Posted By: NowYaKnow
Date Posted: December 25, 2003 at 11:29 AM
"Someone else could verify this, I am pretty sure this is what needs to be done."
Looks right to me. Here's the info I have for the trunk release:
2001/2002 Stratus Sedan - Trunk Release - BLACK/ white - conn. C4, pin 1 @ BCM
2001/2002 Stratus Coupe - Trunk Release - GREEN / WHITE - drivers kick panel
Either way they say you need to 5 wire it. Good luck,
Mike
Posted By: Velocity Motors
Date Posted: December 25, 2003 at 1:24 PM
Make sure you test this connection before you do the 5 wire relay . I had this on a 2002 Sebring Sedan and it ended up being a (-) trigger on the BLACK/ WHITE wire at the switch or at the BCM.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
|