Print Page | Close Window

relay for monentary,latched for reset

Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=75630
Printed Date: May 15, 2024 at 5:15 AM


Topic: relay for monentary,latched for reset

Posted By: 78musicman
Subject: relay for monentary,latched for reset
Date Posted: April 03, 2006 at 3:28 PM

I am trying to configure relays for motion warn-away to roll windows up.I have a ground when armed and a ground when disarmed available to use.I have my window module set up to activate on a pulse.So was wanting to set up where if the motion is triggered it will roll up and not keep sending repeat signal to the roll up untill it is disarmed and armed.This site is great

-------------
colorado tap the rockies



Replies:

Posted By: bigscratch
Date Posted: April 06, 2006 at 3:32 PM
Go to www.pac-audio.com. They make a part called the tr-7 that does what you are describing. It is an intersting device that does many differnt things and is only limited by your imagination.





Print Page | Close Window