ok guys heres one for you. My 06 civic didn't come with a trunk pop so I wanted one to work with my factory key fob. So what I did was my car would unlock the drivers door with one push and unlock the pasenger door with two pushes. So I spiced the wire so that the aftermarket trunk pop would activate one the second push, but now the trunk will open with the insdie locks as well. So this is my situation
both wires that activate the door lactch and trunk pop have a + voltage, when the key fob is pused twice, and when the door switch is used
the lock switches have a + voltage when deactivated and drop down to 0 when pushed thus a - voltage
so what i did was convert the voltage from th door switch to a + output
+ output from the door switch to 86 of a second relay 85 to ground 30 to the trunk pop + output that activates the trunk pop to 30 and 87a to the + of the trunk pop.
but the trunk still opens using the the door switch. It seam that the + output from the door switch is not getting to the relay fast enough.
Please any help would be greatful, I'm sure there is a soulution to this howvere I'm a noobie to these relay and automotive wiring.
Please be gental.
why dotn u just add an alarm or keyless entry and do it right the first time. and even add a remote start while u r at it
because my keyless is intergated in the key so I don't want seprate keyless entry. I
i dont think that can be done, not with a lot of rewiring. the honda shold coem with 3 keys, 2 with remotes and a valet key. im not sure on your model but do honda ALL coem with anti theft, you have no power trunk, so you may not have that. if so jsut make your own key and and a new system, or jsu thave the dealer make a valety key, the 2006 CRV has 3 keys 1 that is valet has no remote just a key.