Linear Actuator Wiring

Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=90139
Printed Date: May 03, 2024 at 7:06 PM

Topic: Linear Actuator Wiring

Posted By: Basscoholic23
Subject: Linear Actuator Wiring
Date Posted: February 06, 2007 at 12:07 PM

I have a linear actuator (model# lact6p from SPAL)that im trying to make it extend when ignition is on,and down when ignition is turned off.I see that they make a controller for it but i really dont want any switches added.This partiticular model of actuator has five wires not just two.the colors being red,black,white,blue,and yellow.
Any help would be greatly appreciated. Thanks in advanced.
Alex B.

Replies:

Posted By: hotwaterwizard
Date Posted: February 07, 2007 at 10:56 PM

See This post https://www.the12volt.com/installbay/forum_posts.asp?tid=88331&PN=1&tpn=2

posted_image

-------------
John DeRosa (Hotwaterwizard)
Stockton California
When in doubt, try it out !

Posted By: hotwaterwizard
Date Posted: February 08, 2007 at 9:30 PM

https://www.spalusa.com/actuators/automated/tech_sheets/LA-IMD3%20Series%20Linear%20Actuatorswpot.pdf

posted_image

-------------
John DeRosa (Hotwaterwizard)
Stockton California
When in doubt, try it out !

Posted By: hotwaterwizard
Date Posted: February 08, 2007 at 9:50 PM

-------------
John DeRosa (Hotwaterwizard)
Stockton California
When in doubt, try it out !

Print Page | Close Window