Print Page | Close Window

2001 lexus is300 door l/ul

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=112902
Printed Date: May 15, 2024 at 1:42 PM


Topic: 2001 lexus is300 door l/ul

Posted By: solara1999
Subject: 2001 lexus is300 door l/ul
Date Posted: April 03, 2009 at 9:39 PM

I need help for my IS300 door lock wiring,i followed with this diagram,however it is not working,i checked other forum said it need an extra relay and a diode for the installation.I connected with the alarm wire from blue and green to the wires below.
LOCK MOTOR|GREEN/ YELLOW        |   |body ECU *1 |
|     UNLOCK MOTOR|blue/black          |   |body ECU *1 |



Replies:

Posted By: i am an idiot
Date Posted: April 03, 2009 at 10:01 PM
     Power Unlock          GREEN/ BLACK          (-)          AT ECU ABOVE FUSEBOX          
     PowerLock          GREEN/ RED          (-)          AT ECU ABOVE FUSEBOX




Posted By: howie ll
Date Posted: April 04, 2009 at 2:21 AM
Good lord on our version,  out comes the control box above the fuse box,  driver's KP,  remove board, cut the motor tracks, solder on two loops, bring them out through a hole then re-assemble, having drilled a hole in the box,  also leads coming in give you your door contacts,. Even putting in a phone kit was a PITA,  you had to run to a plug inside the trunk over the left side wheel arch to pull the factory mute!




Posted By: solara1999
Date Posted: April 04, 2009 at 8:38 AM
Thank you,i will try it.




Posted By: solara1999
Date Posted: April 04, 2009 at 8:48 AM
Hi
I was wondering,that do i needed to add relay for the keyless control door lock and unlock??
Thanks





Print Page | Close Window