Print Page | Close Window

2001 intrepid ac control pinouts

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=114552
Printed Date: May 21, 2024 at 3:40 PM


Topic: 2001 intrepid ac control pinouts

Posted By: Jasonb61
Subject: 2001 intrepid ac control pinouts
Date Posted: June 18, 2009 at 8:12 PM

Hello,

I need the wiring identification/pinouts for the connector on an 01 Dodge Intrepid Heater/AC controls.

Thanks!
-Jason



Replies:

Posted By: tommy...
Date Posted: June 18, 2009 at 10:39 PM

Is the harness bad...Maybe a haynes manual is in  your future...Will keep looking for you...

With the engine running but the vehicle at rest, set the temp to 75. Then simultaneously press the Floor, Mix, and Defrost buttons. The display will start to blink. Then it will present diagnostic trouble codes, the one for the interior sensor is 26. If no codes are stored it will return to the normal temp display.
If there is more than one code, you will find out by pressing the panel mode button. Don't touch anyother button till you read all the codes



-------------
M.E.C.P & First-Class
Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!




Posted By: Jasonb61
Date Posted: June 19, 2009 at 2:52 PM
I'm using the controls in a custom project and just need to what wires go to what. Thanks for the info though




Posted By: i am an idiot
Date Posted: June 25, 2009 at 8:50 PM
Do you have an Ohm meter?   Is there one harness per knob?  Are you able to look at the circuit board and determine which wires go to which control? 

-------------
Let's Go Brandon Brown. Congratulations on your first Xfinity Series Win. LGBFJB





Print Page | Close Window