no signal out of the amp
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=121793
Printed Date: May 02, 2024 at 9:53 PM
Topic: no signal out of the amp
Posted By: ~screwball~
Subject: no signal out of the amp
Date Posted: May 11, 2010 at 8:31 PM
hi, my name is Nate. I have been doing steereos for a good while now. my current project is a system in a boat. My problem is I can not get signal out of the amp being used for the tweeters. I have it hooked up it turns on but no signal. I am using the high inputs on the amp instead of the RCA's. I have tried plugging in the RCA as a signal to see if i could get sound and still nothing I am kind of out of ideas so any help is good help thanks.
-------------
Blood Guts & Busted Knuks
Replies:
Posted By: howie ll
Date Posted: May 12, 2010 at 5:33 AM
U/S amp? Have you tested inputs, i.e. trigger, power and ground. Is there a crossover on it that's set for high pass?
Posted By: ~screwball~
Date Posted: May 12, 2010 at 6:14 AM
I have solid power and ground and signal wire as the amp turns on. It is probaly
a china amp it doesn't have to work hard. There are not any crossovers to switch
on the amp either. I don't get it.
-------------
Blood Guts & Busted Knuks
Posted By: i am an idiot
Date Posted: May 12, 2010 at 7:34 AM
Have you used a volt meter to make sure you have good power and ground?
Posted By: ~screwball~
Date Posted: May 12, 2010 at 5:18 PM
Power is not the problem, the connection is solid. I justcant get a signal out of the amp.
-------------
Blood Guts & Busted Knuks
|