2000 f250 wiring diagram

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=122970
Printed Date: May 10, 2024 at 6:25 AM

Topic: 2000 f250 wiring diagram

Posted By: karns737
Subject: 2000 f250 wiring diagram
Date Posted: August 04, 2010 at 7:42 PM

Does anyone have a wiring diagram for a 2000 F250? Also, I can't figure out which wire to use as a remote wire for an aftermarket amplifier. Any help would be greatly appreciated.

Replies:

Posted By: karns737
Date Posted: August 04, 2010 at 7:49 PM

I guess I should specify that I need the radio wiring diagram....

Posted By: i am an idiot
Date Posted: August 04, 2010 at 7:55 PM

The Accessory wire at the back of the radio will provide 12volts to the remote terminal of the amp anytime the key is on or in the acc position. They do have line out converters that will also give you a remote output. If the Acc wire is not an option for you, you may want to look into that.

WIRE	COLOR	POLARITY	LOCATION
Battery	LIGHT GREEN/ PINK	(+)	RADIO HARNESS
Accesory	BLACK/ VIOLET	(+)	RADIO HARNESS
Ground	BLACK	(-)	RADIO HARNESS
Illumination	LIGHT BLUE/RED	(+)	RADIO HARNESS
Power Antenna	AMP=BLUE
LF Speaker (+)	LIGHT BLUE/WHITE
LF Speaker (-)	ORANGE / LIGHT GREEN
RF Speaker (+)	DARK GREEN
RF Speaker (-)	WHITE/ LIGHT GREEN
LR Speaker (+)	TAN / YELLOW
LR Speaker (-)	GRAY/LIGHT BLUE
RR Speaker (+)	BROWN / PINK
RR Speaker (-)	ORANGE / RED
Amp Location	BELOW RADIO
Steering Cntrls	NO

Posted By: karns737
Date Posted: August 04, 2010 at 9:30 PM

I really appreciate your help. I don't know why i never thought of using the accessory wire. I have always used the remote wires on aftermarket units so i was thinking i needed to use that. Thanks again for the help.

Posted By: 91stt
Date Posted: August 05, 2010 at 3:32 PM

if the blue power antenna wire is present you can use that too

-------------
This information is provided only as a reference.
All circuits should be verified with a digital multi-meter prior to making any connections.