Print Page | Close Window

viper 3002 on 2003 accord 4cyl 2dr

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=125703
Printed Date: May 15, 2024 at 1:11 AM


Topic: viper 3002 on 2003 accord 4cyl 2dr

Posted By: prettybigwood
Subject: viper 3002 on 2003 accord 4cyl 2dr
Date Posted: January 16, 2011 at 10:37 PM

i started installing an alarm in this car first alarm install ever big noob if anyone could help me on the install from start to finish would be nice want to make sure i have everything done right



Replies:

Posted By: jpadj22
Date Posted: January 17, 2011 at 2:18 PM
Are you stuck somewhere?



Posted By: prettybigwood
Date Posted: January 17, 2011 at 2:31 PM
I got the power wire ground domelight door switch I have a solid white wire and solid Orange left to wire and harness two not putting a rs in do I need to install immobilizer harness



Posted By: jpadj22
Date Posted: January 17, 2011 at 2:39 PM

Ok so you have the power,Ground ,dome light supervision and door triggers wired?

Solid orange,solid white is that from the alarm or car?

Its not r/s u dont need a bypass.




Posted By: prettybigwood
Date Posted: January 17, 2011 at 3:09 PM
Those wires are from alarm



Posted By: jpadj22
Date Posted: January 17, 2011 at 3:39 PM

Ok the solid white wire (parking light +) RED / black @ large white plug above fusebox make sure the jumper is on +

Solid orange from alarm is (-) 5oomA ground when armed u can use this wire to trigger a relay etc.

Make sure u test every wire with a DMM. < size=2 face=Helvetica-Bold>< size=2 face=Helvetica-Bold>




Posted By: prettybigwood
Date Posted: January 17, 2011 at 3:42 PM
What's a dmm



Posted By: jpadj22
Date Posted: January 17, 2011 at 3:43 PM
digital multimeter



Posted By: jpadj22
Date Posted: January 17, 2011 at 3:46 PM
If you dont have DMM i would not even try the install dont trust the wiring diagrams.Consider them a guide on where to look. Test every single wire.



Posted By: prettybigwood
Date Posted: January 18, 2011 at 5:20 AM
Ok yeah I got one after I install the harness I can connect the battery and check ? I still need to do the second harness won't be able to finish till Saturday


Print Page | Close Window