2011 Nissan Frontier Alarm/Remote Start Wiring
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=130582
Printed Date: April 29, 2024 at 4:32 AM
Topic: 2011 Nissan Frontier Alarm/Remote Start Wiring
Posted By: smc0922
Subject: 2011 Nissan Frontier Alarm/Remote Start Wiring
Date Posted: February 11, 2012 at 10:15 AM
Looking for remote start wire info for a 2011 frontier crew cab. Both keyed and push to start versions. Thanks!
-------------
-Shawn
AIM: Creegman9695
Replies:
Posted By: ropuma
Date Posted: February 11, 2012 at 2:44 PM
Go to Ifar.ca you will get any information for this car.
Posted By: smc0922
Date Posted: February 12, 2012 at 11:09 AM
Thanks but that is a pay site. Asking the community here for the information. Thanks!
-------------
-Shawn
AIM: Creegman9695
Posted By: flobee4
Date Posted: February 12, 2012 at 11:23 AM
2007 thru 2012 are the same. I think what ropuma was suggesting is to use the Fortin's (ifar.com) EVO-CAN for a bypass unit. The Frontier doesn't come with push to start. On Fortin's web site, when you plug in the 2011 frontier and the EVO-Can comes up for a bypass. Fortin has vehicle specific install manuals too follow as far as the transponder bypass and other features such as Tach, Brake, Locks, trunk release, Door Status. Here is a LINK Its connection type 3.
Posted By: smc0922
Date Posted: February 21, 2012 at 6:46 AM
I am not using a fortin bypass therefore I cannot access the information. Can someone PLEASE paste the wiring info here? The newest frontier in the database is 2006 so an update is needed. Thank you!
-------------
-Shawn
AIM: Creegman9695
Posted By: flobee4
Date Posted: February 21, 2012 at 8:59 AM
oh, and all the ignition wires & battery are located in the drivers kick panel except the second starter wire. the second starter wire you can only find at the ignition harness. getting the ignition wires in the kick panel gives you plenty of slack on the wires compared to the ignition harness.
Posted By: smc0922
Date Posted: February 21, 2012 at 9:42 AM
MODEL YEAR(S)
FRONTIER 2007 -2011
KEY T-HARNESS IMMOBILIZER
N/A N/A NISSAN'S TRANSPONDER ANTI-THEFT SYSTEM, See NOTE #1
PART COLOR LOCATION DIAGRAM
12 VOLT CONSTANT GREEN (+) @ IGNITION SWITCH (WHITE, 6-PIN PLUG), PIN 3
STARTER GRAY (+) @ IGNITION SWITCH (WHITE, 6-PIN PLUG), PIN 2
STARTER 2 N/A
IGNITION 1 WHITE/ GREEN (+) @ IGNITION SWITCH (WHITE, 6-PIN PLUG), PIN 1
IGNITION 2 N/A
IGNITION 3 N/A
ACCESSORY /HEATER BLOWER 1 RED (+) @ IGNITION SWITCH (WHITE, 6-PIN PLUG), PIN 4
ACCESSORY /HEATER BLOWER 2 GREEN/ YELLOW (+) @ IGNITION SWITCH (WHITE, 6-PIN PLUG), PIN 5
KEYSENSE N/A
PARKING LIGHTS ( - ) N/A
PARKING LIGHTS ( + ) RED (+) @ ELECTRIC BRAKE Pre-wiring Harness, (WHITE, 6-PIN PLUG), PIN 4, NOTE #4
POWER LOCK PURPLE (TYPE B) in DRIVERS KICK PANEL, (WHITE, 16-PIN PLUG), PIN 12 or BCM, (WHITE, 15-PIN PLUG), PIN 5, NOTE #2
POWER UNLOCK LT. GREEN (TYPE B) in DRIVERS KICK PANEL, (WHITE, 16-PIN PLUG), PIN 11 or BCM, (WHITE, 15-PIN PLUG), PIN 6, NOTE #2
LOCK MOTOR WIRE PURPLE (5-wire type) in DRIVERS KICK PANEL, (BROWN, 12-PIN PLUG), PIN 8 or BCM, (BLACK, 15-PIN PLUG), PIN 10, NOTE #2
DOOR TRIGGER GRAY ( - ) @ BCM, (WHITE, 15-PIN PLUG), PIN 7, NOTE #2
DOMELIGHT SUPERVISION BROWN ( - ) in DRIVERS A Pillar or BCM, (BLACK, 15-PIN PLUG), PIN 8, NOTE #2
TRUNK RELEASE N/A
SLIDING POWER DOOR N/A
HORN BROWN ( - ) @ HORN Switch or in DRIVERS KICK PANEL, (WHITE, 16-PIN PLUG), PIN 9
TACH Any wire NOT WHITE/ GREEN (AC) @ Any FUEL-INJECTOR
WAIT TO START LIGHT N/A
BRAKE YELLOW or LT. GREEN (+) @ BRAKE Switch or ELCTRIC BRAKE Pre-wiring Harness, (WHITE, 6-PIN PLUG), PIN 2, NOTE #4
FACTORY ALARM DISARM RED / WHITE TO GRAY ( - ) NOTE #3 in DRIVERS KICK PANEL, (WHITE, 16-PIN PLUG), PIN 9 or BCM, (WHITE, 40-PIN PLUG), PIN 7, NOTE #2
ANTI-THEFT NISSAN'S TRANSPONDER ANTI-THEFT SYSTEM, See NOTE #1
NOTES
NOTE #1: This vehicle is Equipped with NISSAN'S TRANSPONDER ANTI-THEFT SYSTEM,
for REMOTE STARTING ONLY you will need the Part #791 BYPASS Module and an
Extra Ignition key. (Requires extra key for Operation)
Part # XK09 for REMOTE STARTING ONLY, requires 1 key for
programming, NO key required for Operation.
Part # DB-ALL for REMOTE START/KEYLESS Entry, requires 1 key for programming
and NO Key for Operation.
To Order the go to the SECURITY BYPASS MODULE Page or INTERFACE BYPASS
MODULE Page on this website.
NOTE #2: the BCM (Body Control Module) is located under the Drivers Dash and to the RIGHT
of the Steering Column.
NOTE #3: TEST this wire while Turning the KEY in the DRIVERS DOOR. This wire will also DISARM
the Factory Alarm System.
NOTE #4: the ELECTRIC BRAKE Pre-wiring Harness is located to the RIGHT of the Steering
Column, near the IGNITION SWITCH.
LINK 1 LINK TEXT 1 LINK 2 LINK TEXT 2
EXTRA INFORMATION
-------------
-Shawn
AIM: Creegman9695
|