Print Page | Close Window

2013 dodge dart 1.4l turbo

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=133408
Printed Date: May 10, 2024 at 11:43 PM


Topic: 2013 dodge dart 1.4l turbo

Posted By: captaingowa
Subject: 2013 dodge dart 1.4l turbo
Date Posted: January 23, 2013 at 10:27 PM

I really want to install a remote start in my 2013 Dodge Dart 1.4L Turbo w/manual trans.. though I cannot find anything on the wiring for the car..

Any suggestions for transponder bypass would be posted_image as well..

Thanks in advance.



Replies:

Posted By: kreg357
Date Posted: January 24, 2013 at 5:54 AM

Right now, there doesn't appear to be any bypass modules available from the main three manufacturers
( Fortin, iDatalink and XPressKit ).  If you car has a standard key, a "Key In The Box" might be the only option.

The only source listing the wiring for the Dart is Ready Remote, but it is incomplete.  It lists the PURPLE / Brown
Ignition MUX wire but nothing about resistor values.  Here is a link : 
https://www.readyremote.com/main.asp?make=Dodge&model=Dart 
There is nothing on the Clutch Interlock wire, so a DMM will come in handy there.

Most bypass modules for the newer Chrysler vehicles are very good and are full of features.  It might be
worth the wait for Fortin or iDatalink to release a bypass module solution for that car.



-------------
Soldering is fun!


Print Page | Close Window