autowatch car alarm remote programing
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=136775
Printed Date: May 03, 2024 at 8:24 AM
Topic: autowatch car alarm remote programing
Posted By: mr signal
Subject: autowatch car alarm remote programing
Date Posted: June 09, 2014 at 4:41 AM
How do I program a new remote to a 276 autowatch alarm.? i have programed a new remote to a autowatch 446 before and it was quite easy with the ignition .when you switch the ignition on while the immobiliser is active the movement sensor light will stay on. But it doesn’t do the same with the 276 autowacth. when you switch the ignition on while the immobiliser is active the light keep flashing, can anyone tell me how to program a new remote to this module.
-------------
Mr signal
Replies:
Posted By: howie ll
Date Posted: June 09, 2014 at 8:54 AM
Again it's a product made in South Africa, as I've already told you contact Conlog.
The only person on this site who's even heard of them is me.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: mr signal
Date Posted: June 09, 2014 at 9:09 AM
Appologies thank you.
-------------
Mr signal
Posted By: subaruimpreza
Date Posted: November 04, 2014 at 5:14 AM
Hi There,
Autowatch is a product from South Africa, is manufactured by PFK Electronics and you can get them here: https://autowatch.pfk.co.za/contact_us/head_office.htm The product in question cannot be programmed the same way as with the 446RLi. You will need the 5 Digit code on a sticker inside the box, send it to PFK and then - with a new solder-able remote - solder in the new code.
-------------
Fitment Centre
|