2013 mazda3 skyactiv pts remote start
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=137339
Printed Date: May 02, 2024 at 12:04 AM
Topic: 2013 mazda3 skyactiv pts remote start
Posted By: kuraijay
Subject: 2013 mazda3 skyactiv pts remote start
Date Posted: September 27, 2014 at 10:10 PM
Hi 12volt community
im trying to install Viper 5906v and a idatalink ads-alca (type 4 wiring) in my mazda3 skyactiv with PTS. i have the idatalink programmed in d2d mode and got the viper's security functions to work but not the remote start funtions. idatalink wiring diagrams provide
1st ignition input - i believe this is on the remote start harness
2nd starter (-) output - i can't find this
2nd ignition (-) output - cant find this either
also i wanted to know if any other wires on the remote start harness needs to be wired.
Replies:
Posted By: howie ll
Date Posted: September 28, 2014 at 1:54 AM
1) Ignition is the pink on H3 harness.
2) 2nd. starter (-) is violet / YELLOW on H2 harness.
3) 2nd ignition (-) is pink/white on the H2 harness.
On H3 you need to connect to a 12V+ constant H3 Red, RED / black and RED / white.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|