92 or 93 jdm toyota mr2 remote start
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=137525
Printed Date: April 28, 2024 at 2:25 AM
Topic: 92 or 93 jdm toyota mr2 remote start
Posted By: andrewiffic
Subject: 92 or 93 jdm toyota mr2 remote start
Date Posted: October 24, 2014 at 9:53 PM
My 92.5 JDM Toyota MR2 has some different wiring colours for the remote start system than the USDM models. Does anyone have a JDM (or maybe even a EDM since all right-hand drive ones may be the same) wiring diagram? Thanks
Replies:
Posted By: howie ll
Date Posted: October 25, 2014 at 4:04 PM
What's your problem?
Here's the answer, TEST.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: jedictw
Date Posted: November 13, 2014 at 11:07 AM
right @howie ll, but sometimes it is nice to have a start off point...that way you're not taking every friggin door apart to see what wires run speakers for example...
Posted By: howie ll
Date Posted: November 13, 2014 at 12:15 PM
Actually the speaker wires never changed colour any year any market, 88 Corolla, 2014 Lexus, same colours now could you be more specific as to your problem?
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: jedictw
Date Posted: November 13, 2014 at 11:20 PM
no i have none...i found what this man was looking for. just a hint! if you don't have the diagrams, then just say so or nothing at all! we all can test every wire...been there done that...sucks sewer pipe!!
Posted By: howie ll
Date Posted: November 13, 2014 at 11:25 PM
I don't need the diagrams, just a test light you've got 1 or 2 constants, 1 X ACC, 2 X IGN. and 1 X starter, no by-pass what's your problem?
Lights are in the steering column loom, locks at the driver kick panel.
All door triggers are in the factory alarm module behind right rear quarter panel, siren to engine bay at rear, new alarm brain under driver's chair.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|