2008 honda accord lx
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=137880
Printed Date: April 28, 2024 at 11:32 PM
Topic: 2008 honda accord lx
Posted By: andre3wap
Subject: 2008 honda accord lx
Date Posted: December 06, 2014 at 9:43 AM
Hello guys,
I have a 08 accord sedan, I have a python remote start installed and working fine, except I can't get it to unlock the door. so far I tapped into the lock and unlock wires in the door, it locks the doors fine, but it doesn't unlock it when I press the button. I am wondering if it's because I didn't tap into the Car alarm disarm wire, which is in the door as well ?
Any help would be highly appreciated please and thanks in advance.
Replies:
Posted By: howie ll
Date Posted: December 06, 2014 at 11:36 AM
Either via diodes join unlock and factory disarm or key sense at ignition.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: kreg357
Date Posted: December 06, 2014 at 2:20 PM
Here is a great DIY Pictorial on that model car : https://www.the12volt.com/installbay/file.asp?ID=851
Take a look at the last 3 pages for info on hardwiring the door locks. ------------- Soldering is fun!
|