Ford Mondeo TDCi Wagon 2013/2014
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=141360
Printed Date: May 07, 2024 at 8:03 AM
Topic: Ford Mondeo TDCi Wagon 2013/2014
Posted By: tencap
Subject: Ford Mondeo TDCi Wagon 2013/2014
Date Posted: June 03, 2016 at 9:10 PM
Hi just a request for alarm wiring for Aus RHD Ford Mondeo 2013/2014.
I've looked at the other Ford wiring in the install bay but none are applicable for the Mondeo.
Thanks in advance!!
Replies:
Posted By: tonanzith
Date Posted: June 05, 2016 at 12:08 AM
Which is it 2013 or 14? And I will pull wiring. It SHOULD be the same or very similar to the ford fusion. My understanding is it is a fusion branded as a mondeo in certian countries.
-------------
Gary Sather
Posted By: tencap
Date Posted: June 05, 2016 at 1:40 AM
Hello thanks! It's a 2013, I've looked at the Fusion wiring in the install bay and no colours match and there is no 26pin plug on the fuse/smart juction box.
Posted By: howie ll
Date Posted: June 05, 2016 at 2:33 AM
Ford Euro software is a nightmare for DB-ALL2 don't even attempt a hard wire.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: howie ll
Date Posted: June 05, 2016 at 2:38 AM
There's a DB-ALL 2 set up for the 13 model. 14 was the belated change-over to match the Fusion and Mazda 6, body and ELECTRICS completely different.
Go to a DEI dealer for the alarm and the DB-ALL 2, make sure the dealer flashes the DB-ALL 2 for you and supplies a wiring diagram.
Using a DB-ALL2 as W2W, i.e. connecting the dotted as well as the solid lines in the diagram can be done on the bench pre-installation it will save you hours!
And remember to connect the ignition wire,
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|