2002 Toyota Sequoia reverse signal wire

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=141603
Printed Date: April 27, 2024 at 4:05 AM

Topic: 2002 Toyota Sequoia reverse signal wire

Posted By: joeydmendoza
Subject: 2002 Toyota Sequoia reverse signal wire
Date Posted: August 11, 2016 at 2:42 PM

Hi. I am installing an aftermarket pioneer deck with backup camera. I need to see if someone can help me locate the reverse signal wire so that when I' put the car in reverse the rear camera will display on the pioneer unit. I very much appreciate some help.

-------------
Jdm

Replies:

Posted By: lurch228
Date Posted: August 12, 2016 at 5:44 PM

Check for a Red wire with black trace possibly with silver dots in the trace. Either in relay/fuse box or Black Plug drivers kick panel. Others say it can be found on the passenger side kick pannel above glove box, and behind drivers seat coming from center.

There are Pics (need Pic #4) here but need to be a member to view them.https://www.tundrasolutions.com/forums/1gen-sequoia/45739-sequoia-avic-d3-install-pics-speed/#post462142

Posted By: howie ll
Date Posted: August 14, 2016 at 7:35 AM

Or go old school, check the wiring at the plug to the light cluster and follow forward or simply wire it there. You've must have pulled down the back end already to wire the camera feed.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.

Posted By: lurch228
Date Posted: August 14, 2016 at 3:46 PM

Don't think he has got that far yet still trying to find it up front. With the info he has been given he should be able to find it.

Print Page | Close Window