2022 Hyundai Kona SE, Trunk Release Wiring
Printed From: the12volt.comForum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=147799
Printed Date: May 14, 2024 at 9:11 PM
Topic: 2022 Hyundai Kona SE, Trunk Release Wiring
Posted By: aharrington
Subject: 2022 Hyundai Kona SE, Trunk Release Wiring
Date Posted: November 16, 2023 at 2:01 PM
Replies:
Posted By: kreg357
Date Posted: December 04, 2023 at 8:27 PM
The Blade-AL flashed with the AL(DL)-HK10 firmware should allow the Compustar 925-s to pop the trunk. There is no additional wiring needed. This is noted on Page 2 of the Blade-AL with AL(DL)-HK10 firmware install guide.
The 925s sends a trunk release signal to the Blade cartridge internally. The Blade's CAN connection to the vehicle sends that trunk release command to the vehicle. Remember that the Trunk Release button on the Compustar remote must be held for 2.5 seconds to pop the trunk. This in noted in the Owners Manual on the remote functions.
-------------
Soldering is fun!
The 925s sends a trunk release signal to the Blade cartridge internally. The Blade's CAN connection to the vehicle sends that trunk release command to the vehicle. Remember that the Trunk Release button on the Compustar remote must be held for 2.5 seconds to pop the trunk. This in noted in the Owners Manual on the remote functions.
-------------
Soldering is fun!