1993 GMC Truck aladdin a-2000

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=19859
Printed Date: June 09, 2024 at 9:35 AM

Topic: 1993 GMC Truck aladdin a-2000

Posted By: wrxdriven1
Subject: 1993 GMC Truck aladdin a-2000
Date Posted: October 09, 2003 at 12:23 AM

i have a 93 gmc truck (auto) and i need a wiring diagram for a aladdin a-2000 install.

ALso if anyone has the b/w installation manual that would be great too. Online or elsewhere.

Thank you so much for your time

Jason

Replies:

Posted By: wrxdriven1
Date Posted: October 30, 2003 at 3:09 PM

I have the entire aladdin system installed in my 93 gmc ck pickup but the door lock wont respond. Is this car a 5 wire reverse polarity system?

How should i go about finding the wires and wiring it?I think i have most of the wires found and the two relays, but im not sure.

please help me

Posted By: jrilla
Date Posted: October 30, 2003 at 3:39 PM

If you have a 2 door truck withOUT keyless entry, then you have reverse polarity locks.

They are
POWER LOCK is lt. blue
POWER UNLOCK is BLACK/ red

They can be found in either door boot

There is a diagram of how to wire reverse polarity door locks on the relays page on this website.

-------------
J Rilla

Owner/Installer

Posted By: Velocity Motors
Date Posted: October 30, 2003 at 3:39 PM

The non-keyless trucks have the 5 wire and the keyless has the Type B (+). You will need to wire in two relays for the Aladdin to operate the doors if your truck has no keyless from factory.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: wrxdriven1
Date Posted: December 02, 2003 at 7:27 PM

I really need some help here. I am currently installing an aladdin a-2000 on a '93 gmc 2 door truck w/ out keyless entry but it does have power door locks. My problem is with the door locks. I cannot figure out how to wire them. What type of locks they are. and maybe possible I may just have the wrong wire locations.

First off i am using the light blue and black w/ red wires found in the door boot on the drivers side. I cut these wires in half and have used them on (30) and (87a) on both relays. and then ran the green wire from the brain to 86 and the blue wire to 85. 12 volt fused wires are on 87 and 85 and 87 and 86.

I have the RED / black wire from the aladdin brain grounded

When i press the power locks button in the car the locks operate, but the transmitter (FOB) does not make them work.

I need some help let me know if i am using the correct wires, relay system, RED / blk wire + or - etc...

Thanks you so much

Posted By: wrxdriven1
Date Posted: December 02, 2003 at 8:51 PM

please help i have yet to figure this out

Posted By: tuneman
Date Posted: December 04, 2003 at 3:15 AM

Your truck has the 5wire system. Look the left of your screen and find the heading CAR SECURITY. Then click on the subheading DOOR LOCKS. Then scroll down to find 5 WIRE ALTERNATING, then click on diagram. Follow this and you will have no problems.

-------------