Ram 03 pick up

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=20093
Printed Date: May 20, 2024 at 6:17 AM

Topic: Ram 03 pick up

Posted By: audioconcepto
Subject: Ram 03 pick up
Date Posted: October 14, 2003 at 3:04 PM

we are having trouble with the remote starter, it strart and 10 seconds later it turns off, we all ready put the transponder bypass and the 2 ignicion cables

Replies:

Posted By: themagicone
Date Posted: October 14, 2003 at 5:05 PM

do you have the negative starter wire hooked up right?

Posted By: kenmci
Date Posted: October 14, 2003 at 10:50 PM

You may want check that you have a valid tach wire. IF you do then it make need to be set to low voltage sense if possible, if that doesn't work then you can try using just voltage sense instead of the tach wire.

Posted By: warren-g
Date Posted: October 15, 2003 at 4:52 AM

this vehicles does not have a second starter wire

it does have a second ignition it is RED / wht there are 2 RED / wht wire one is constant 12votls other is second ignition

this vehicle also has 2 heat/ac wire you must activate

there are greeen and 2nd is orange

Posted By: Velocity Motors
Date Posted: October 15, 2003 at 5:39 AM

Sounds like the tach did not learn the first time properly. Make sure you let the truck idle for at least 10 minutes before attempting to learn the tach . If the truck starts and runs fine for 10 seconds, it's your tach learning that is not correct. Try this and post your results.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Print Page | Close Window