Print Page | Close Window

2005 Ford Escape need info for navi

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=52636
Printed Date: May 03, 2024 at 5:24 PM


Topic: 2005 Ford Escape need info for navi

Posted By: digiandy1
Subject: 2005 Ford Escape need info for navi
Date Posted: March 26, 2005 at 2:36 PM

Hello,

I am trying to hookup an aftermarket kenwood navigation system.  I dont know where the VSS speed sensor wire should go or when the reverse sensor should go?  Any help would be much appreciated, THANKS! (2005 Escape)




Replies:

Posted By: digiandy1
Date Posted: March 27, 2005 at 10:00 PM

I found my answers, I thought I would post them in case anyone else needs this info in the future.

VSS (Speed Sensor Wire) is located under the hood, all the way back on the firewall at the PCM.  You will see three big black harnesses, it is in the harness that is most towards the drivers side.  You need to tap into the Light Blue wire.

REVERSE SENSOR Use the wire at the tail light.  If you are at the rear of the vehicle and open the hatch, on the passenger side is the access door for your jack.  in there, there is a black tube of wires leading to the tail lights, you should tap into the BLACK/ pink (Black with pink stripe) wire.

Have a great day!

Andy


Print Page | Close Window