Print Page | Close Window

05’ Venture van

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=57671
Printed Date: April 27, 2024 at 3:30 AM


Topic: 05’ Venture van

Posted By: Ren92
Subject: 05’ Venture van
Date Posted: June 14, 2005 at 11:15 AM

Does anyone have the wiring info on a 05' Venture van?



Replies:

Posted By: thepencil
Date Posted: June 14, 2005 at 11:26 AM


DIRECTWIRE™ WIRING INFORMATION - CHEVROLET / VENTURE / 2005 / Remote Start

12volts red (60A), RED / white (40A)   +   ignition harness
Starter yellow   +   ignition harness
Second Starter N/A       
Ignition pink   +   ignition harness
Second Ignition white   +   ignition harness
Third Ignition N/A       
Accessory orange   +   ignition harness
Second Accessory brown   +   ignition harness
Keysense lt. green   -   ign harn or BCM, blue plug, pin D2
Notes: The BCM (Body Control Module) is to the right of the glove box.
Power Lock RED / black   -   dr kick or BCM, blue plug, pin C11
Notes: The BCM (Body Control Module) is to the right of the glove box.

The door lock wires will only meter when turning the key in either door key cylinder.

Have to program the door lock pulse duration for 3.5 seconds to unlock the doors.

On vehicles without factory alarm, use lt. blue for lock and white for unlock. The wires are in either kick panel or at the BCM, blue plug, pins C7 and C6.
Power Unlock ORANGE / black   -   dr kick or BCM, blue plug, pin C5
Notes: The BCM (Body Control Module) is to the right of the glove box.

The door lock wires will only meter when turning the key in either door key cylinder.

Have to program the door lock pulse duration for 3.5 seconds to unlock the doors.

On vehicles without factory alarm, use lt. blue for lock and white for unlock. The wires are in either kick panel or at the BCM, blue plug, pins C7 and C6.
Lock Motor gray   5wi dr kick or BCM, natural plug, pin C
Notes: The BCM (Body Control Module) is to the right of the glove box.
Unlock Motor tan   5wi dr kick or BCM, natural plug, pin A
Notes: The BCM (Body Control Module) is to the right of the glove box.
Parking Lights+ brown   +   headlight switch or driver kick
Parking Lights- BROWN / white   -   BCM, blue plug, pin D11
Notes: The BCM (Body Control Module) is to the right of the glove box.
Hazards same as turn signal wires       
Turn Signal(L) lt. blue (F), yellow (R)   +   turn signal switch
Turn Signal(R) dk. blue (F), dk. green (R)   +   turn signal switch
Reverse Light lt. green   +   driver kick, harness to rear
Door Trigger use dome supervision wire       
Notes: Individual door trigger wires are at the BCM, in the blue plug. The driver door is tan in pin C1. The passenger door and liftgate is dk. blue in pin C3. The sliding doors are orange in pin C4. Use all three wires and diode isolate each.

The BCM (Body Control Module) is to the right of the glove box.
Dome Supervision gray/black   -   BCM, natural plug, pin F
Notes: The BCM (Body Control Module) is to the right of the glove box.
Trunk/Hatch Pin use dome supervision wire       
Hood Pin N/A       
Trunk/Hatch Release N/A       
Power Sliding Door lt blue/black (L), lt blue (R) -   each kick, harness to rear
Factory Alarm Arm arms with lock       
Factory Alarm Disarm disarms with unlock       
Disarm No Unlock see notes       
Notes: To disarm the factory alarm without unlocking the doors, use a 0.8 second pulse on the unlock wire.
Tachometer PURPLE / white   ac   ign ctrl mod or PCM, blu plug, pin 8
Notes: The ignition control module is on the top of the engine on the passenger side.

The PCM (Powertrain Control Module) is in the air cleaner assembly on the front of the engine compartment on the driver side.
Wait to start N/A       
Brake Wire white   +   brake pedal switch
Parking Brake lt. blue   -   parking brake switch
Horn Trigger black   -   switch or BCM, blue plug, pin D10
Notes: The BCM (Body Control Module) is to the right of the glove box.
Memory Seat 1 white   -   memory seat switch on dash
Memory Seat 2 purple   -   memory seat switch on dash
Memory Seat 3 N/A   -     
Interface Module: Category:
Immobilizer Bypass Required:
Yes Type:
PASS-Key III
Part #: 555GW
Alternate Part1 #: 556UW
Alternate Part2 #: 555U
Notes: When using the 555U, use the lt. green (-) key sense wire at the ignition harness to interrupt the blue wire on the 555U so that when the key is inserted to do take over the vehicle does not see two transponders at the same time. Refer to DirectFax document 1079 for wiring information.
Interface Module: Category:
Door Lock Interface Required:
No Type:
N/A
Part #: N/A
Notes:
Interface Module: Category:
Combo Interface Required:
Yes Type:
Data Bus
Part #: 457GW
Notes: Can use the 457GW to bypass the PASS-Key III, but it will not control the door locks on this model year.



      
This wiring information is being provided free of charge on an "as is" basis, without any representation or warranty. It is your responsibility to verify any circuit before interfacing with it using a digital multimeter.
Directed electronics, Inc. assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case is and remains the responsibility of the installer. DEI assumes no liability or responsibility resulting from improper installation, even in reliance upon this information.





-------------
Be careful whose advice you buy, but be patient with those who supply it.posted_image





Print Page | Close Window