Print Page | Close Window

Peugeot 306 2000 model alarm and central

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=61144
Printed Date: April 29, 2024 at 8:04 PM


Topic: Peugeot 306 2000 model alarm and central

Posted By: electron1kid
Subject: Peugeot 306 2000 model alarm and central
Date Posted: August 11, 2005 at 11:49 AM

Hi ,

I would like to ask is anyone knows where the alarm and central locking module are situated for a 306 year 2000 model? and if any diagram is available please

thanks

Jesmond




Replies:

Posted By: thepencil
Date Posted: August 11, 2005 at 3:38 PM
It's all that I have if it helps you at all.




DIRECTWIRE™ WIRING INFORMATION - PEUGEOT / 306 DIESEL TURBO (UK) / 1997 / Remote Start

12volts          
Starter white      ignition harness
Second Starter          
Ignition yellow      ignition harness
Second Ignition          
Third Ignition          
Accessory          
Second Accessory          
Keysense       
Power Lock orange or white    -   under back seat, blk plug
Power Unlock violet or white    -   under back seat, blk plug
Lock Motor          
Unlock Motor          
Parking Lights+ grey & pink     driver dash, lt brn plug
Parking Lights-       
Hazards       
Turn Signal(L)       
Turn Signal(R)       
Reverse Light       
Door Trigger white    -   CDL relay
Dome Supervision          
Trunk/Hatch Pin white      at the bootlight
Hood Pin          
Trunk/Hatch Release          
Power Sliding Door       
Factory Alarm Arm red    -   unit behind o/s rear quarter
Factory Alarm Disarm blue    -   unit behind o/s rear quarter
Disarm No Unlock          
Tachometer          
Wait to start       
Brake Wire          
Parking Brake       
Horn Trigger          
Memory Seat 1       
Memory Seat 2       
Memory Seat 3       
Interface Modules: Not Available



      
This wiring information is being provided free of charge on an "as is" basis, without any representation or warranty. It is your responsibility to verify any circuit before interfacing with it using a digital multimeter.
Directed electronics, Inc. assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case is and remains the responsibility of the installer. DEI assumes no liability or responsibility resulting from improper installation, even in reliance upon this information.





DIRECTWIRE™ WIRING INFORMATION - PEUGEOT / 306 (UK) / 1996 / Remote Start



12volts          
Starter blue      ignition harness
Second Starter          
Ignition yellow      ignition harness
Notes: Fuel cut pump is white wire at a double relay module attached to the firewall on the n/side. Module is brown.
Second Ignition          
Third Ignition          
Accessory          
Second Accessory          
Keysense          
Power Lock orange or white    -   ctrl mod behind rear seat
Notes: Extend to 3 second lock pulse to deadlock.
Power Unlock violet or lt brown    -   ctrl mod behind rear seat
Lock Motor          
Unlock Motor          
Parking Lights+ red & green      at the steering column
Parking Lights-          
Hazards          
Turn Signal(L)          
Turn Signal(R)          
Reverse Light          
Door Trigger grey or yellow    -   loom driver side A pillar
Dome Supervision          
Trunk/Hatch Pin white      at the bootlight
Hood Pin          
Trunk/Hatch Release          
Power Sliding Door          
Factory Alarm Arm          
Factory Alarm Disarm          
Disarm No Unlock          
Tachometer brown pin 4      yel conn. top of the dash
Wait to start          
Brake Wire red      brake pedal switch
Parking Brake          
Horn Trigger          
Memory Seat 1          
Memory Seat 2          
Memory Seat 3          
Interface Modules: Not Available



      
This wiring information is being provided free of charge on an "as is" basis, without any representation or warranty. It is your responsibility to verify any circuit before interfacing with it using a digital multimeter.
Directed electronics, Inc. assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case is and remains the responsibility of the installer. DEI assumes no liability or responsibility resulting from improper installation, even in reliance upon this information.





-------------
Be careful whose advice you buy, but be patient with those who supply it.posted_image





Print Page | Close Window