05 nissan murado

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=65576
Printed Date: June 16, 2024 at 12:33 AM

Topic: 05 nissan murado

Posted By: asiaadad
Subject: 05 nissan murado
Date Posted: November 03, 2005 at 9:48 PM

hey guys,

does anyone know how to catch the door lock circuit on this vehicle without going to the drivers door module????/ the bcm has a 5wire but only the drivers door will unlock using this method.

any help would be greatly appreciated.

thanks much

mike

-------------
mike holbrook

Replies:

Posted By: KarTuneMan
Date Posted: November 04, 2005 at 1:48 PM

At the BCM pins 13 and 14 (no wire there) are the lock/arm (pin 13) and the disarm/unlock (pin 14) you can solder on to the back of the board or try and feed a wire into the socket. Im not sure what the door boot looks like, but Id rather run wires thru into the door than solder onto a BCM curcuit board!

-------------

Print Page | Close Window