Print Page | Close Window

vss for 1999 mazda millenia

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=80799
Printed Date: May 02, 2024 at 6:22 PM


Topic: vss for 1999 mazda millenia

Posted By: mp9432
Subject: vss for 1999 mazda millenia
Date Posted: July 26, 2006 at 5:59 PM

hi all, where do I find the VSS wire on a 99 mazda millenia 2.5? is it under the hood or dash and what color am I looking for? I'm about ready to install a pioneer avic-d1 and don't have a wiring diagram. Someone told me to look under the front left wheel well, but don't know wire color. any help would be appreciated.

-------------
stereo man



Replies:

Posted By: josh1979
Date Posted: July 26, 2006 at 6:05 PM
Speed Sense GREEN/ red    ECM under center of dash
Radio 12v blue/red   +  radio
Radio Ground BLACK/ red   -  radio
Radio Ignition pink/green   +  radio
Radio Illumination green   +  radio
Factory Amp Turn-on     
Power Antenna     
LF Speaker +/- yellow - blue    radio or bose amplifier
Notes: The bose amplifier is behind the rear seat on the passenger side. The rear speaker wires are different on the bose amplifier. They are LR(+/-) grn/blk - grn/org, RR(+/-) yel/blu - yel/grn.
RF Speaker +/- pink - violet    radio or bose amplifier
Notes: The bose amplifier is behind the rear seat on the passenger side. The rear speaker wires are different on the bose amplifier. They are LR(+/-) grn/blk - grn/org, RR(+/-) yel/blu - yel/grn.
LR Speaker +/- green - grn/yel    radio or bose amplifier
Notes: The bose amplifier is behind the rear seat on the passenger side. The rear speaker wires are different on the bose amplifier. They are LR(+/-) grn/blk - grn/org, RR(+/-) yel/blu - yel/grn.
RR Speaker +/- grn/blk - grn/org    radio or bose amplifier
Notes: The bose amplifier is behind the rear seat on the passenger side. The rear speaker wires are different on the bose amplifier. They are LR(+/-) grn/blk - grn/org, RR(+/-) yel/blu - yel/grn.


-------------
bring back the rotary phone so i dont have to press 1 to proceed in english




Posted By: mp9432
Date Posted: July 26, 2006 at 6:24 PM
thanks a lot, I also have a bose HU and want to keep the bose speakers and amps, can I just add an interface to ramp down the load going to the bose amps? Crutchfield told me that the bose amps will handle the 4 ohm load from the new pioneer HU and it will work OK that way, but I'm a little skeptical. They just wanted to sell me a factory wiring harness adapter and said it would work fine.

-------------
stereo man





Print Page | Close Window