Remote start for 04 f150
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=82805
Printed Date: June 06, 2024 at 5:21 AM
Topic: Remote start for 04 f150
Posted By: flopper23
Subject: Remote start for 04 f150
Date Posted: September 12, 2006 at 9:15 PM
After installing a remote start in my truck. It comes on and shuts off a few seconds later. It does this three times. Can anyone help? thanks
Replies:
Posted By: Bmnicolosi
Date Posted: September 12, 2006 at 9:53 PM
did you install the bypass needed? i usually use a dei 556uw that takes a key.
-------------
If you say "I already know how", don't ask me a single question.
Posted By: shaggy12volt
Date Posted: September 12, 2006 at 9:53 PM
what remote start are you useing brand name and model number
-------------
The Shagmaster
1999 Chevy Suburban 15" lift sittn on 22's sets 7'5"
1992 Chevy Astro Van all Bagged out Dubbed THE SUICIDER
Installing for over 18 years Looking for empolyment NOW send PM for resum
Posted By: flopper23
Date Posted: September 13, 2006 at 3:06 AM
yes i installed the bypass. ready remote model 23927.
Posted By: shaggy12volt
Date Posted: September 13, 2006 at 3:16 AM
did you preform the tach learn on the unit,
-------------
The Shagmaster
1999 Chevy Suburban 15" lift sittn on 22's sets 7'5"
1992 Chevy Astro Van all Bagged out Dubbed THE SUICIDER
Installing for over 18 years Looking for empolyment NOW send PM for resum
Posted By: flopper23
Date Posted: September 13, 2006 at 3:29 AM
no i went with the no tach option
Posted By: Velocity Motors
Date Posted: September 13, 2006 at 8:56 AM
The unit is not detecting the tach, use the tach input instead of voltage sense. If this still doesn't solve the problem, disconnect the bypass module and insert a key into the key cylinder and try to remote start the truck, if successful, then it's the bypass not working properly. If it still doesn't work, then you may have missed an IGN or ACC wire during installation.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: flopper23
Date Posted: September 13, 2006 at 3:40 PM
Thank you. I let you know the out come.
Posted By: shavedeclipse
Date Posted: September 13, 2006 at 4:47 PM
i had the same problem in an eclipse and a ford f 150 as stated before the no tac or voltage option usually doesnt work i had the same symptons and hooked up the tac wire and it worked beautiful !! good luck
-------------
theres no replacement for displacement!!!!!!
Posted By: flopper23
Date Posted: September 13, 2006 at 6:09 PM
Can some one tell me where I attach the tach wire?
Posted By: KarTuneMan
Date Posted: September 13, 2006 at 9:22 PM
| TACH | Any wire that is NOT RED or RED / LIGHT GREEN | @ IGNITON COIL or FUEL INJECTORS |
-------------
|