Print Page | Close Window

VSS for 06 Dodge Ram w/ 5.7 Hemi

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=83830
Printed Date: May 15, 2024 at 7:58 PM


Topic: VSS for 06 Dodge Ram w/ 5.7 Hemi

Posted By: mrreddog
Subject: VSS for 06 Dodge Ram w/ 5.7 Hemi
Date Posted: October 07, 2006 at 10:27 AM

anyone know where to find vss on the 06 dodge ram trucks with the 5.7 hemi?



Replies:

Posted By: shaggy12volt
Date Posted: October 07, 2006 at 11:57 AM
 DODGE, RAM PICKUP, 2006, Speed Sense: dk. blue/orange (SRT-10 only) PCM, BLACK/ gray plug, pin 27 The PCM is on the passenger side firewall. The BLACK/ gray plug is the second plug down from the top.

-------------
The Shagmaster
1999 Chevy Suburban 15" lift sittn on 22's sets 7'5"
1992 Chevy Astro Van all Bagged out Dubbed THE SUICIDER
Installing for over 18 years Looking for empolyment NOW send PM for resum




Posted By: mrreddog
Date Posted: October 08, 2006 at 11:21 AM
hey shaggy, any idea where it is on the 5.7 liter hemi ram?   the srt10 is the v-10 viper powered dodge ram and i have the 5.7 hemi ram. thanks..posted_image




Posted By: shaggy12volt
Date Posted: October 08, 2006 at 12:41 PM

Try this my buddy said this might be it (dk. GREEN/ YELLOW) PCM, top black plug Pin 13

let me know if this works so I can add it to my database thanks



-------------
The Shagmaster
1999 Chevy Suburban 15" lift sittn on 22's sets 7'5"
1992 Chevy Astro Van all Bagged out Dubbed THE SUICIDER
Installing for over 18 years Looking for empolyment NOW send PM for resum




Posted By: mrreddog
Date Posted: October 08, 2006 at 4:39 PM
there is no dk. GREEN/ YELLOW wire in the top plug on ecm, also no BLACK/ grey plug. it has 4 black plugs on the ecm...any other ideas?posted_image




Posted By: mrreddog
Date Posted: October 10, 2006 at 6:31 PM
anyone else have any idea????posted_image




Posted By: sparkie
Date Posted: October 10, 2006 at 7:47 PM
Pheripheral has a new module to interface an aftermarket radio. It derives a VSS signal from the CAN bus. I am not sure whether it is available yet or not. The last time I checked with my supplier it wasn't out yet. It is listed on their website. If all else fails and all you need is a VSS signal, try using a 250-4165 kit from Rostra cruise controls. It is a magnet sensor kit you attach to the drive shaft to get a signal from.

-------------
sparky




Posted By: mrreddog
Date Posted: October 13, 2006 at 9:22 PM
will the 250-4165 kit work with a rb-1 nav/radio?





Print Page | Close Window