Print Page | Close Window

2007 yukon speed sensing wire

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=87519
Printed Date: May 21, 2024 at 1:25 AM


Topic: 2007 yukon speed sensing wire

Posted By: hansen
Subject: 2007 yukon speed sensing wire
Date Posted: December 19, 2006 at 9:21 PM

trying to install a avn 5500 nav system in a yukon 2007. need to find the speed sensing wire? any help would be appreciated, thanks



Replies:

Posted By: KarTuneMan
Date Posted: December 31, 2006 at 10:32 AM
VSS WIRE Yellow/black In Black connector on ECM   AC 
 The ECM is located on the driver's side of the engine compartment behind the headlight.


-------------



Posted By: gsam321
Date Posted: January 06, 2007 at 12:03 PM
Under the master cylinder GREEN / WHITE (under junction box)



Posted By: hansen
Date Posted: January 14, 2007 at 12:40 AM

thanks, took care of this a little while ago. found out if you have a bose system, the speed sense wire should be on the radio harness. 

VSS Wire -- Location: ECM (located in engine compartment, drivers side, near radiator) Black 72 pin plug, the pin number is 57, the pin location may or may not have a Yellow w/ Black wire in it. If it doesn't, insert a wire /w pin.

Backup Wire -- Location: BCM (Body Control Module) (located near steering column, left side) on second connector from top(white), Pin 22, Dark Blue wire.

 

 all Bose systems with automatic volume control (in the C6 GM calls it "Bose Audio Pilot") has the VSS wire going to the back of the radio, dark green with a white stripe. On the C6 w/Bose there are two dark green wires with white stripe on the 12 pin harness. One is at pin H and the other at pin D. The VSS wire is at pin D.


Print Page | Close Window