lookin for a pic, 99 neon lock, unlock

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=90173
Printed Date: May 23, 2024 at 11:52 AM

Topic: lookin for a pic, 99 neon lock, unlock

Posted By: teddy233
Subject: lookin for a pic, 99 neon lock, unlock
Date Posted: February 07, 2007 at 4:31 PM

Hi all you nice people :) (hows that for sucking up) can someone send a pic of the connector i'm looking for, (dodge neon 1999) for the lock n uplock ... site tells me a blue 16 pin on drivers side but i don't have any blue 16 pin connectors that i can see...

Replies:

Posted By: cutter1122
Date Posted: February 07, 2007 at 11:43 PM

posted_image

lock ORANGE / violet

unlock pink/violet

check the wire come from the driver door boot

Posted By: teddy233
Date Posted: February 10, 2007 at 2:35 PM

Hey,

thanks for the diagram... so i connected my wires to the correct ones... but the remote won't lock or unlock the doors...

A friend told me that when a pro installed his unit they needed a relay for the door locks or something like that... is there a way i can test this; like putting some juice to the wires to see what happens :)(pictures smoke)

thanks,

Posted By: teddy233
Date Posted: February 15, 2007 at 6:45 PM

I just want to say that i figured it out... Took me a little while and some reading to realize that the relays in the pic don't come with the car. So i went out and found that you can buy a kit $20 with the 2 relays and harness... My next question is... how do i know what wire to put on what side of the cut...??? I mean if it doesn't work the first time I Just switch them but i'm getting short on fuses hahaha posted_image

Other then that... this question is solved! :) Thanks

Posted By: swerve
Date Posted: February 16, 2007 at 5:32 PM

the 30's should go to the motor side of your wiring, the 87a's to the switch side, 86 and 87 get 12v and 85 goes to your lock and unlock from the alarm.

-------------
git yer swerve on!

Print Page | Close Window