I need a wire diagram for a 2007 chevy impala stock radio. Im trying to hook up three power acoustic subs in a box and a thousand watt amp to my stock radio. I prefer to keep the regular look of the dashboard for the moment. I also was wondering if the radio comes stock with rca plug ins. Im going to install the speakers my self with my brother and I bought a 4ga. amp installation kit. I think I need a piece to hook the amp and speakers to the radio but Im not sure what the piece is called and the best way to install. Not trying to do much I just want a little vibration in my whip when I ride. If someone knows exactly what the pieces are I need to connect my sounds to the stock please let me know along with where I can find a diagram of the wires. If possible also an easy step by step on how to install them also. Thanks
-------------
errrryday im hustlin'
When I took the stock radio out of my dashboard There were two plug-ins. One was what looked like a harness. (It had a number of multi color wires connected to one peice whhich was connected to the radio.) The other was just one single cord (which lookd like a microphone plug-in). I was told I need to hook my rca and the remote wire to the back of the stock radio. Which is the best way to do that, and what guage wire is reccomended for a 1000 watt amp with 3 10' subs.
-------------
errrryday im hustlin'
just hook the remote wire up to accessory at the fuse panel (the ignition harness is best but hard to get to in that car) or if it has a factory amp use the pink wire behind the radio
use a line output converter, AKA - line level adapter, AKA - LOC, AKA - LOC80 for the RCA cables
-------------
"If a man made it, another can modify it...it just takes some thinking."
"If you ask questions, you're a fool for 5 minutes; if you don't, you're a fool for a lifetime."