Gonna try and install the alarm myself into a 2003 Honda Odyssey LX, so no keyless entry or factory alarm. Wiring colors and locations would be helpful. TIA!
| ITEM | WIRE COLOR |POL| WIRE LOCATION |
| 12V|white |+ |ignition harness |
| STARTER|BLACK/ white |+ |ignition harness |
| IGNITION|BLACK / YELLOW |+ |ignition harness |
| SECOND IGNITION|yellow |+ |ignition harness |
| ACCESSORY|WHITE/ black |+ |ignition harness |
| POWER LOCK|BLACK/ white |- |green 6-pin plug *1 |
| POWER UNLOCK|GREEN/ red |- |green 6-pin plug *1 |
| LOCK MOTOR|WHITE/ red | |green 10-pin plug *1 |
| UNLOCK MOTOR|lt. GREEN/ red | |green 10-pin plug *1 |
| DISARM DEFEAT|lt. GREEN/ red | |green 14-pin plug *1 |
| PARKING LIGHTS +|RED / black | |10-pin plug *1 |
| HEADLIGHTS|blue/red |- |steering column |
| DOOR TRIGGER|BLACK/ white |- |domelight on/off switch |
| DOME SUPERVISION|lt. green |- |domelight on/off switch |
| TRUNK/HATCH PIN|tied in with door | | |
| HOOD PIN|yellow/red |- |right of steering column |
|TRNK/HTCH RELEASE|*4 | | |
| FCTRY ALARM ARM| | | |
|FCTRY ALRM DISARM|blue |- |DDM in driver door |
| TACHOMETER|blue | |above the brake master *2 |
| SPEED SENSE|blue/white | |PCM *3 |
| BRAKE WIRE|WHITE/ black |+ |brake pedal switch |
| HORN TRIGGER|lt. GREEN/ blue |- |steering column |
| WIPERS|blue and blue / YELLOW|- |steering column |
| LF WINDOW UP/DN|RED / blu - RED / yel |A |drivers window motor |
| RF WINDOW UP/DN|blu/wht - blu/yel |A |RF window switch |
| LR WINDOW UP/DN|grn/red - grn/yel |A |LR window switch |
| RR WINDOW UP/DN|RED / blu - RED / yel |A |RR window switch |
| RADIO 12V|WHITE/ blue |+ |radio |
| RADIO GROUND|black |- |radio |
| RADIO SWITCH|WHITE/ red |+ |radio |
| RADIO ILLUMINATE|RED / black |+ |radio |
| LF SPEAKER|blu/grn - gry/blk | |radio |
| RF SPEAKER|RED / grn - brn/blk | |radio |
| LR SPEAKER|blu/yel - brn/wht | |radio |
| RR SPEAKER|RED / yel - brn/wht | |radio |
Notes:
NOTE: This vehicle has an immobilizer system that needs to be bypassed when adding remote start. Use DEI part number 555H or 555U. *1 The plug is located at the bottom of the fuse box. *2 In a 2-pin test connector. *3 The PCM is located in the center console. The speed sense is located in a 32-pin plug. *4 To open and close the power sliding door with a single channel see directfax document #1085.
-------------