Print Page | Close Window

navigation not working after reconnection

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=111550
Printed Date: May 21, 2024 at 2:47 PM


Topic: navigation not working after reconnection

Posted By: bdl666
Subject: navigation not working after reconnection
Date Posted: February 12, 2009 at 9:10 PM

I unplugged a KNA-G510 from A DDX-6019 and now the navigation does not work.

I was working on a customers vehicle (doing a RS) and they ask me if I could fix the deck that was crooked. Whoever installed the deck didn't use the factory brackets and the radio was loose. So I unplugged the radio to attach the factory brackets and to tape the tangle of wires that they left behind the radio.

After I plugged everything back in to it the KNA-G510 will not work. The radio goes in to navigation but nothing is displayed. I checked all the wiring and there is nothing loose or broken.


-------------
ieSpell rocks.



Replies:

Posted By: lspker
Date Posted: February 12, 2009 at 9:58 PM

Try resetting the deck.  If you plugged in the the deck power before the navi unit, it may not know it's there.




Posted By: bdl666
Date Posted: February 12, 2009 at 10:06 PM
I did but it does the same thing.

-------------
ieSpell rocks.



Posted By: lspker
Date Posted: February 13, 2009 at 9:33 PM
Try downloading the mannual from Kenwoodusa.com, you may have to change the video setting input for nav


Print Page | Close Window