pac tr 7
Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=116821
Printed Date: May 14, 2024 at 11:43 PM
Topic: pac tr 7
Posted By: turbodx
Subject: pac tr 7
Date Posted: October 08, 2009 at 8:44 PM
I just bought a used IVA-D901 and it is already prewired with the Pac TR-7 , I'm trying to install the NVE-N852A ( alpine Navi ) , my question is do I connect the wire for the reverse (comming from the navi) to the PAC and if so which color wire on the PAC do i use ?
Replies:
Posted By: turbodx
Date Posted: October 08, 2009 at 8:45 PM
2001 Toyota 4Runner SR5
Posted By: KPierson
Date Posted: October 08, 2009 at 8:53 PM
What exactly is the function of the tr 7? I think I already know the answer, but want to make sure before I post anything. ------------- Kevin Pierson
Posted By: i am an idiot
Date Posted: October 08, 2009 at 9:15 PM
The only purpose of the reverse wire is to keep the nav display from flipping upside down when you back up. It should not be connected to the TR-7
Posted By: turbodx
Date Posted: October 09, 2009 at 6:19 AM
cool thanks , the HU brain itself has a wire that needs to be connected to the reverse , can anyone tell me where to find the reverse wire in an automatic 2001 toyota 4 runner ?
I did go to the install ay and found the color code for the wire , i just don't know where to locate it.
Posted By: i am an idiot
Date Posted: October 09, 2009 at 6:22 AM
It should be in the harness of wires that goes from the drivers kick panel to the rear of the car. remove the kick panel or the drivers door sill. It should be in both of those locations.
|