Print Page | Close Window

2011 toyota sienna oem backup camera

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=127468
Printed Date: March 29, 2024 at 5:45 AM


Topic: 2011 toyota sienna oem backup camera

Posted By: mangolango
Subject: 2011 toyota sienna oem backup camera
Date Posted: May 27, 2011 at 12:40 AM

I want to install Alpine head unit in my Sienna but dunno which wire to tap from OEM camera to my Alpine unit?? The Multi display have bunch of wire but dunno which is video feed?? Please help!!



Replies:

Posted By: Mike M2
Date Posted: May 27, 2011 at 6:24 AM
Done it on the Highlander, it's not hard to figure out. Look for shielded wires going to the back of the display...

-------------
Mike M2
Tech Manager
CS Dealer Services




Posted By: mangolango
Date Posted: May 28, 2011 at 5:06 PM
Thanks Mike! how you find the wire? You use meter to fine it?




Posted By: Mike M2
Date Posted: May 30, 2011 at 6:53 PM
No, simply look at the back of the display. Open the harness up a little and look for the only wire there that is shielded like an RCA jack wire is.

-------------
Mike M2
Tech Manager
CS Dealer Services




Posted By: mangolango
Date Posted: June 11, 2011 at 7:35 PM
My sienna don't have the wire that you told me?? Is that 2 wires? I screw up the whole thing! My Dash and the Multi information display is not working now have to go toyota to fix it :( All the indicator light and the gauge is not working :(




Posted By: mangolango
Date Posted: June 20, 2011 at 5:24 PM
I found a cable behind the Screen that has 4 wire red, black, white with brown dot and orange that look like RCA wire. Which one should I tap into the Video source?





Print Page | Close Window