Print Page | Close Window

gentex 261 rear view mirror

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=131374
Printed Date: May 19, 2024 at 10:12 AM


Topic: gentex 261 rear view mirror

Posted By: mystical_miles
Subject: gentex 261 rear view mirror
Date Posted: May 07, 2012 at 9:45 PM

Hi Everyone, I was able to get this to work thanks to all of your wiring details.
I have two questions:

1. What is the button with the white dot for? This is the button to the left of the "onstar" button. I first thought to go between temp and compass direction as per below but not certain as I don't have a temp sensor.

2. mine has the single display (1 line not 2), but when you 1st power it up shows the degrees symbol with the "C" for Celsius and the "F" for Fahrenheit. Thing is there isn't enough room to display both. Others I have seen have a top line for compass and line underneath for temp. Wondering if I hooked up a temp sensor would this cut out the compass? If so I could hook up a switch, to go back and forth when wanted, correct???



Replies:

Posted By: mystical_miles
Date Posted: May 08, 2012 at 1:28 AM
found out #1 is the phone button, still not sure about #2, any ideas?




Posted By: mystical_miles
Date Posted: May 12, 2012 at 7:41 PM
nobody has any idea?





Print Page | Close Window