Kenwood DDX7015

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=36365
Printed Date: May 20, 2024 at 3:36 PM

Topic: Kenwood DDX7015

Posted By: nc1981
Subject: Kenwood DDX7015
Date Posted: July 28, 2004 at 9:44 PM

I have purchased a Kenwood DDX7015 double-din HU. I have read many post on here about grounding the wire to bypass the safety feature for the monitor. Most of the post only talk about one wire that i have to ground, this HU has several wires to wire to the parking brake. My question is, do i only have to ground the wire that goes to the parking break? And what do i do, if anything, to the other wires?? Everyone's help will be GREATLY appreciated!!

Brandon

Replies:

Posted By: jburk
Date Posted: July 30, 2004 at 7:23 PM

I installed my DDX7015 last night. On the small three wire harness, the green and black go to ground if your bypassing the parking break. The yellow goes to constant power (battery). I simplified my install by using the black ground and yellow power wires from the larger wiring harness.

Print Page | Close Window