audiovox disarm wire
Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=49411
Printed Date: May 13, 2024 at 5:54 PM
Topic: audiovox disarm wire
Posted By: tarasdad
Subject: audiovox disarm wire
Date Posted: February 05, 2005 at 1:31 PM
i am installing a remote starter on a honda with a dealer installed alarm. anyone know which wire comming out of the audiovox pursit 9232a to connect to the remote starts factory disarm wire to disarm it on remote start?
-------------
Never be too busy chopping wood to take time to sharpen your axe.
Replies:
Posted By: audiopro111
Date Posted: February 06, 2005 at 3:59 PM
all u have to do is run the yellow ign. wire from your 9232a to the yellow/blk wire from u'r remote start and your remote start will supply the ignition feed to your alarm when needed this ylw/blk wire is only on audiovox remote starts but there should be a wire tht does this same function onyour remote start
-------------
AudioPro111
|