Print Page | Close Window

2007 chevy suburban, factory camera

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=96244
Printed Date: October 31, 2024 at 6:12 PM


Topic: 2007 chevy suburban, factory camera

Posted By: guatemalanboy
Subject: 2007 chevy suburban, factory camera
Date Posted: August 08, 2007 at 12:11 AM

Trying to keep the factory camera to be use with avic z1

-------------
100%Guatemalan



Replies:

Posted By: swerks
Date Posted: August 13, 2007 at 1:49 PM
check out the gm- unlock from g-net it unlocks the factory nav screen so that you can watch video while driving very cool!!

-------------
Steve Sverdahl
Swerksound Auto Electric
Red Deer Alberta




Posted By: NowYaKnow
Date Posted: August 13, 2007 at 6:40 PM
This is from a Tahoe, but it may be the same. Looks like there is a 16 pin @ the back of the OEM radio with a pink (pin 6 +) and a light blue (pin 7) wire which is the video feed from the OEM camera. Also in that same plug pin 5 dark/green white is your VSS. I'm not sure if the OEM radio turns on the camera or not. The cam is controlled from a small metal box under the pass seat. I BELIEVE it is always on and the oem radio just switches and shows the signal. So with that logic you would just have to solder an RCA on to those two pins and plug it into your input and try it. If it comes on great your set to go if not, you probably need to figure out a way to turn on the module/camera. Also not sure if the OEM radio or the control box actually flips the image, but I'm thinking the control box.

Mike





Print Page | Close Window