want some opinions on center console

Hey fellas, ladies.. I'm about to start glassing my console (or should i say attempt) to start my center console, and would love some views, thoughts, opinions..etc.. All i want is to be able to put at least (prefer both) but at least one 6x9 in the center... i'm putting 2 10's against back wall.... Should i glass box and center seperately or together? Lemme know what you think Caio!Look twice, think thrice, 1 splice/ 1 slice!

This is a phrase i came up with and something i will now live by.

Separately would make you life a lot easier putting it in the car. If you would like for me to design something just let me know. Have funRonald Bailey Owner/ Installer of VIBRATION CUSTUM SOUNDS. CUSTOM BOX DESIGNER AND BUILDER

TID-896 7" screen,Amp-BX1206d

4/0power/ground cables

4-12 mofos 12ft3 box tuned 40hz DB:163.1

Hey airhead, i wouldn't a couple ideas, ya, go ahead, shoot... lemme see what you come up with. I have a general idea (sorta ) of what i want it to look like... but am COMPLETELY open for suggestions.. Here's some new pics... ^^ This is called determination! These are before and after dash gauge covers, i custom painted them..(i make custom inks, and paints) More to come folks! Look twice, think thrice, 1 splice/ 1 slice!

This is a phrase i came up with and something i will now live by.

me cutting acrylic for speaker rings for dashgot a pm about a closer pic of gauge inserts...Look twice, think thrice, 1 splice/ 1 slice!

This is a phrase i came up with and something i will now live by.

After FINALLY begin able to get and put in my new bucket seats, i can finally start mapping out my center console...here goes!Look twice, think thrice, 1 splice/ 1 slice!

This is a phrase i came up with and something i will now live by.