Posted: February 25, 2011 at 10:39 AM / IP Logged
Posted: February 26, 2011 at 12:41 PM / IP Logged
Posted: February 26, 2011 at 12:45 PM / IP Logged
Posted: February 26, 2011 at 3:17 PM / IP Logged
Posted: February 26, 2011 at 3:20 PM / IP Logged
Posted: February 26, 2011 at 4:13 PM / IP Logged
Posted: February 26, 2011 at 5:00 PM / IP Logged
Posted: February 27, 2011 at 7:50 AM / IP Logged
Posted: February 27, 2011 at 9:28 PM / IP Logged
Posted: March 01, 2011 at 4:07 PM / IP Logged
Printable version

| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
| Search the12volt.com |
Follow the12volt.com
Sunday, November 23, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Sunday, November 23, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.






post some pic's of your locations and Ill try and help you out.
in the pic you can see that he has put 2 6x9s and a 10" sub into this area. I am not wild about putting a seat cover over a 10" sub for a lot of reasons so I am going to put 6.5"s where he has his 6x9s. I reckon this mid-range from a 2-way speaker is wasted at this height - since bass is more omnidirectional having the bass down low in the car should work fine.
* fullrange 4"s
my plan to have these on the bottom of the dash pointing down (actually angled a little toward the driver) was based on security. if the sound will be really bad with this location I would be willing to go for a custom kickpanel setup like shown here:
* tweeters
The reason I want these in the walls is because I want to fill a hole left after removing the half-installed ancient seatbelt mount that was in the car when I got it. This is the location I mean:
Ok, this isn't especially hidden but who robs a tweeter anyway? I would also consider having the tweeters in the kickpanels as shown above (but then why not just have a 2-way?)
cheers
I found
Make sure to measure the areas before you buy anything.