10'' monitor in suburban dash

this is the before pics

this is the monitor going into the dashthis is how i took it aparti removed this 2 screwsthen this plateAFter that 4 screws that connect the 2 partsapart now next was the ir transmiterfinally all apart next was the 4 screws in the back 1 on each conernext 8 little clamps that hold the lcd in placebefore i removed the lcd i use tape to mark the edges of lcdfinally an empty casethis will be its new resting placei have no pictures of the build here is the final productusing the tape came really handy laterLet me know what you guys think

dbcat

that'll make one hell of a nav screen... looks awesome!  Snap a pic of the complete install with something displayed on the monitor for us.

yes IT does I also connected the rear view camera to it pic of that laterdbcat

here is a snap of the rear view camera at workdbcat

Sweet. More people should post with lots of great pics. I like the shape of your transition to the factory dash. Nice job!

i cut off the others and used the same rings and my first layer

after resinthen i decited i didn't want the vents

dbcat

Nice work. Really smooth!2013 Kia Rio -90a alternator

DDX470HD GTO14001 GTO1014D (x3)

Big3 in 1/0G

1/0G to GTO14001

Very nice!! Add a little texture and you are all set.