Soft on/off for side markers

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=28257
Printed Date: September 15, 2025 at 12:21 PM

Topic: Soft on/off for side markers

Posted By: Dan_uk
Subject: Soft on/off for side markers
Date Posted: March 12, 2004 at 2:30 PM

Im trying to devise a way to make my side marker lights (or running lights? not sure of the US terminology!) fade on when the switch is pressed on the dash, and then fade off when the switch is turned off. Basically, I just need a circuit which will fade a 12v filament bulb on when a current is applied, then fade it off when the current is removed.

Is there a simple way to do this, maybe using capacitors? The duration of the fade only has to be 2-3 seconds.

Thanks in advance

Replies:

Posted By: cbag1
Date Posted: March 16, 2004 at 11:28 AM

Check this up might help to meet your needs.

https://www.webelectricproducts.com/products.htm

Print Page | Close Window