PORT/VOLUME CALCULATION

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=423
Printed Date: August 13, 2025 at 1:55 PM

Topic: PORT/VOLUME CALCULATION

Posted By: D-MAN
Subject: PORT/VOLUME CALCULATION
Date Posted: April 23, 2002 at 2:20 AM

WHEN FIGURING BOX VOLUME, WOULD I INCLUDE THE PORT IF IT IS OUTSIDE BOX?

-------------
MORE BASS!!

Replies:

Posted By: pat28ca
Date Posted: April 23, 2002 at 9:24 AM

add the box volume to the port volume . that will give you the total volume that your box should be. remember all your measurements have to be in the same type, ie inches , ft ,etc.the port volume is extra on top of the box volume.

Posted By: pat28ca
Date Posted: April 23, 2002 at 9:28 AM

one last thing, the measurements that you get from any box programs or specs are inside volume. take into account that the thickness of the box will give you a different measurement.

Posted By: barkdog666
Date Posted: April 26, 2002 at 4:37 PM

Go to Radio Shack and look for a book called Advance Speaker Systems. It will tell you everything you want to know about building boxes, speaker reaction and passive crossovers. Later

Print Page | Close Window