display illumination

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=979
Printed Date: November 15, 2025 at 8:39 PM

Topic: display illumination

Posted By: empire69
Subject: display illumination
Date Posted: May 27, 2002 at 8:02 PM

hi i own a very ancient alpine cd head. i have one problem with it. the display works but is not backlit. is there a seperate connection for this. i can see the display if i shine a light on it but otherwise can. it has been in and out of a few cars and looks to be missing a few connections. i read somewhere that a orange and white wire is for illumination. i dont have on of those, and if i did its gone. could it be anything else. please help. thanks

Replies:

Posted By: install_tech
Date Posted: May 28, 2002 at 12:20 AM

It sounds like the Illumination bulbs are blown. You can order replacement bulbs here: https://www.pacparts.com/scripts/SelManuf.cfm?id=GUEST&name=GUEST&Cfid=185463&CFTOKEN=40490863

*Note- these bulbs are small and usually have to be soldered to the circuit board.

Hope this helps

-------------
install_tech

Print Page | Close Window