Print Page | Close Window

Pics of Cylindrical Sub Enclosures

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=26756
Printed Date: August 15, 2025 at 4:42 AM


Topic: Pics of Cylindrical Sub Enclosures

Posted By: ANeonRider
Subject: Pics of Cylindrical Sub Enclosures
Date Posted: February 18, 2004 at 7:22 PM

Hey, I am looking for some pics of cylindrical sub enclosures to see if it looks good. Any opinions on the use of the cylindrical enclosures is welcome.



Replies:

Posted By: audiomechanic
Date Posted: February 20, 2004 at 10:45 PM
how is it going to be intigrated in the vehicle???

what size sub are you going to use?

-------------



Posted By: ANeonRider
Date Posted: February 20, 2004 at 11:40 PM

using a 12" sub, and its most likely gonna be angled out of a piece in the back of the trunk like this:

posted_image

gotta love ms paint, lol, any suggestions welcome.




Posted By: ANeonRider
Date Posted: February 20, 2004 at 11:51 PM
https://f1.pg.photos.yahoo.com/ph/big_feet_69ca/detail?.dir=/Unfiled+Photos&.dnm=bb3e.jpg



Posted By: S.I.Autosports
Date Posted: February 21, 2004 at 6:53 AM

These are cylindrical enclosures, however i dont suggest them.  Here is the link if hte pic doesnt show.... https://www.members.aol.com:/tsl812/buckets

posted_image




Posted By: pureRF
Date Posted: February 21, 2004 at 9:12 AM
haha i dont think he ment those kinda cylindrical enclosures.

-------------
dream it, build it, fiberglass it



Posted By: ANeonRider
Date Posted: February 21, 2004 at 11:30 AM
lol, thats a little too ghetto. Definately gonna be fiberglass, maybe use a very large PVC pipe as my mold


Print Page | Close Window