Print Page | Close Window

custom kick, yet another volume question

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=32905
Printed Date: August 20, 2025 at 3:45 AM


Topic: custom kick, yet another volume question

Posted By: ex99125b
Subject: custom kick, yet another volume question
Date Posted: May 28, 2004 at 4:40 PM

been lurking for awhile, figured I'd attempt my first project. ICustom kick panels in a cherokee for Diamond Audio Hex 600 6.5 components. My question is about the volume. First off, I could get away with making pods for my doors but as far as the door vloume thing and vibration, I'm thinking kicks are better and more stable, but that leads to volume. Do I make a sealed kick or just a front panel? I mean I did a preliminary workup on th evolume required for th emidbass driver and it was something like 62 litres...not gonna happen in a kick. What do I do?



Replies:

Posted By: audiomechanic
Date Posted: May 29, 2004 at 10:03 AM
build it sealed........then if there are any issues the back can always be cut out.

-------------


Print Page | Close Window