hid 07 dodge ram

Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=104887
Printed Date: July 04, 2025 at 10:22 PM

Topic: hid 07 dodge ram

Posted By: 07dodgeram
Subject: hid 07 dodge ram
Date Posted: May 21, 2008 at 7:12 AM

I recently bought a conversion kit for HID for my 07 dodge ram. Everything is hooked up by the directions, but I have a problem. When the truck is not running the lights work but as soon as I turn on the engine the lights go out. Is there any wisdom someone could share on this matter? I saw similar posts about everyone else having flickering, I don't have flickering, they just shut off. Thanks, Josh

Replies:

Posted By: Velocity Motors
Date Posted: May 21, 2008 at 8:27 AM

Is this a plug and play system or is it a hard wired system ?

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: 07dodgeram
Date Posted: May 21, 2008 at 9:20 AM

Yes it is supposed to be a plug and play made by OLLO, I got it off of ebay. I have been messing around with a couple different things. I tried a capacitor that some tech guy told me to try, didn't work. Any suggestions?

Posted By: 07dodgeram
Date Posted: May 21, 2008 at 1:28 PM

*update* I got them working. I just beefed up the wire gauge and put in 2 relays instead of 1.

Posted By: night runner
Date Posted: August 09, 2008 at 7:52 AM

I have a 06 Ram with the same proble. I ordered 2 new relays and the company that makes the HID kit sent me two seperate relays and harnesses attached to them. I tried the 2 new relay I bought and they solve the problem but the lights will not shut off. I tried the harness/relay kit that HALO sent me and I lose the high beams. Can you tell me what you did to make them work. Did you keep the original relay and add 1 more or did you replace the original with your own. I used the momentary to constant diagram in the relay section to see if that would solve it but just ended up wasting alot of connections for the same overall result.

Thanks,
Josh