unused indicator harnesses
Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=105399
Printed Date: November 03, 2025 at 8:45 PM
Topic: unused indicator harnesses
Posted By: trentmeyer23
Subject: unused indicator harnesses
Date Posted: June 11, 2008 at 7:23 AM
Hi all, my brother recently just purchased a 1990 Toyota Corolla Seca, and the previous owners have shaved the indicators. In doing this they have left the indicators attached to the harness, and left them hanging in the engine bay, bouncing around, causing the bulbs to break and making the indicators flash fast. Now my question is, is it possible to remove those harnesses and keep the indicator function normal(maintaining the circuit)? If so how would i go about this?
Replies:
Posted By: KPierson
Date Posted: June 11, 2008 at 2:24 PM
You would either have to install load resistors to simular the missing bulb or replace the flasher.
-------------
Kevin Pierson
Posted By: trentmeyer23
Date Posted: June 15, 2008 at 2:53 AM
ok thanks, how would i work out the resistor size based on the wattage of the bulb?
Posted By: toppanel
Date Posted: June 25, 2008 at 10:02 PM
This may be cheating but go to your local auto store and buy an electric relay. You probably have a thermal relay and can get it to flash slower with an electric one.
-------------
DJ Mono
|