2005 dodge ram capacitor

Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=123836
Printed Date: July 13, 2025 at 6:42 PM

Topic: 2005 dodge ram capacitor

Posted By: dvaldez0989
Subject: 2005 dodge ram capacitor
Date Posted: October 08, 2010 at 8:33 AM

working on 05 ram ...cant remeber on what pins the capacitor go on the relay ...anyone??

Replies:

Posted By: oldspark
Date Posted: October 11, 2010 at 2:03 AM

Probably to the correct ones....

Refer to wiring diagram....

Posted By: i am an idiot
Date Posted: October 11, 2010 at 7:57 AM

or give us just a bit more information. We will not use it against you.

Posted By: dvaldez0989
Date Posted: October 11, 2010 at 2:11 PM

normally if you want to put it inline on the harness for the truck it goes between the ground and the low beam wire. but i want to put it on the relay so one capacitor will supply both.

Posted By: oldspark
Date Posted: October 11, 2010 at 2:23 PM

Getting closer....

Both what - the relay and low beam....
Low & high....
Beam and audio....

?

Posted By: i am an idiot
Date Posted: October 11, 2010 at 8:04 PM

Whatever wire is connected to both low beams and the relay terminal. That is where you should connect it if you want to use one capacitor for both lamps.

Print Page | Close Window