Print Page | Close Window

wiring my aftermarket headlights

Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=130492
Printed Date: July 06, 2025 at 2:58 AM


Topic: wiring my aftermarket headlights

Posted By: mujahid
Subject: wiring my aftermarket headlights
Date Posted: February 02, 2012 at 7:51 PM

i recently change my headlights on my es8 civic. the original bulbs were h4 but this one come with two h1 bulbs one for high and one for low. when i turn on the high beam the low beam comes of i think this is the way it is suppose to work. is there any way i could wire this for both lamps to come on when i turn on the high beam.

-------------
@0 Hertz Xpertz/Team SPL



Replies:

Posted By: oldspark
Date Posted: February 03, 2012 at 1:11 AM
A diode (IN4004 etc) from the hibeam relay coil with the diode's line towards the lowbeam relay coil.


Print Page | Close Window